Lab color space

From Wikipedia, the free encyclopedia.

CIE L*a*b* (CIELAB) is the most complete color model used conventionally to describe all the colors visible to the human eye. It was developed for this specific purpose by the International Commission on Illumination (Commission Internationale d'Eclairage, hence the CIE acronym in its name). The * after L, a and b are part of the full name, since they represent L*, a* and b*, derived from L, a and b.

The three parameters in the model represent the luminance of the color (L, L=0 yields black and L=100 indicates white), its position between red and green (a, negative values indicate green while positive values indicate red) and its position between yellow and blue (b, negative values indicate blue and positive values indicate yellow).

The Lab color model has been created to serve as a device independent, absolute model to be used as a reference. Therefore it is crucial to realize that the visual representations of the full gamut of colors in this model are never accurate. They are there just to help in understanding the concept, but they are inherently inaccurate.

Since the Lab model is a three dimensional model, it can only be represented properly in a three dimensional space. A useful feature of the model however is that the first parameter is extremely intuitive: changing its value is like changing the brightness setting in a TV set. Therefore only a few representations of some horizontal "slices" in the model are enough to conceptually visualize the whole gamut, assuming that the luminance would be represented on the vertical axis.

An important thing to remember about the Lab model is the fact that it's inherently parametrized correctly, therefore no specific color spaces based on this model are needed.

CIE 1976 L*a*b* is based directly on the CIE 1931 XYZ color space as an attempt to linearize the perceptibility of color differences, using the color difference metric described by the MacAdam ellipse. The non-linear relations for L*, a*, and b* are intended to mimic the logarithmic response of the eye. Coloring information is referred to the color of the white point of the system, subscript n.

Color Home Page

Department of Communication, Seton Hall University